3com PLM Series Owner's Manual

PLM™ Series Powered Loudspeaker Management™ systemsRev. 1.0.5Item no. NCG-PLM Network Configuration Guide

10 PLM Series Network Configuration Guidemay be to place a group of local switches in each “zone”, which are first interconnected to form a “local area

PLM Series Network Configuration Guide 115.4 PLM / Dante Network Size LimitationsThe information below is provided to give an overview of the termino

12 PLM Series Network Configuration Guidefor use in larger venues; however local legal restrictions may apply in some countries. Please contact your L

PLM Series Network Configuration Guide 13Code Point (DSCP) protocol, and it must implement strict priority control over at least the top two priority

14 PLM Series Network Configuration Guide6 NeTwORk HaRDwaRe ReCOMMeNDaTIONSonly guarantees the performance of the EtherCon for 1000 mating cycles. In

PLM Series Network Configuration Guide 15REFERENCEs AND DEFINITIONs 7The following definitions will help the user better understand some specific terms

16 PLM Series Network Configuration Guide8 ADDITIONAl INFORmATIONContact:Lab.gruppen ABFaktorvägen 1SE-434 37 KungsbackaSWEDENPhone: +46 300 56 28 00

Lab.gruppen ab • SwedeninternationaL contact • [email protected] uS contact • [email protected]

2 PLM Series Network Configuration Guide1 CONTENTs1 CONTENTS ...

PLM Series Network Configuration Guide 32.1 O ver viewThank you for choosing the Lab.gruppen PLM Series of Powered Loudspeaker Management systems for

4 PLM Series Network Configuration Guide2 INTRODUCTIONFrom the Start menu, open the Control Panel. 1. Under Network and Internet, choose View Ne

PLM Series Network Configuration Guide 5PLM SeRIeS aND DaNTe NeTwORkINg FeaTUReS 33.1 Networking OverviewDesigned for use on an Ethernet network, th

6 PLM Series Network Configuration Guide4.1 SPF OverviewCritical network configurations (such as those trans-porting audio signals) should avoid “Sin

PLM Series Network Configuration Guide 7avOIDINg SINgLe POINT OF FaILURe (SPF) ISSUeS 44.1.1 Signal type redundancyUse of this topology allows a PLM

8 PLM Series Network Configuration Guide5.2 PLM Series Topology OverviewThanks to the auto -sense and auto-uplink features of the PLM Series’ Ethern

PLM Series Network Configuration Guide 9NeTwORk CONNeCTIONS aND TOPOLOgIeS 55.2.3 Daisy-chained switchesIn such a topology, each group of PLM Series