3com AP3750 Owner's Manual download pdf (Page 16)

7 Checking the LED Indicators

When the access point is connected to power, LEDs indicate activity as follows:

LEDs Color Indicates

Health Solid green • The access point has a valid management link with a wireless

switch.

• The access point has booted.

• The access point has received a valid configuration from a

wireless switch.

• At least one radio is enabled or is in sentry mode on the access

point.

Solid amber The access point is waiting to receive boot instructions and a

configuration file from a wireless switch.

Alternating green

and amber

The access point is booting and receiving its configuration file from a

wireless switch.

Radio 1 (.11b/g)

Radio 2 (.11a)

Solid green A client is associated with the radio.

Blinking green Associated client is sending or receiving traffic.

Blinking amber Non-associated client is sending or receiving traffic.

Alternating green

and amber

The radio is unable to transmit. This state can occur because of any

of the following:

• Excessive radio interference in the environment is preventing

the radio from sending beacons.

• The radio has failed.

Unlit The radio is disabled.

If the radio is enabled, no clients are associated with the radio and

there is no traffic activity.

Radio 2 LED

Health LED

Radio 1 LED

840-9502-0010

10015414-AA_AP3750_QSG.fm Page 16 Tuesday, July 25, 2006 1:59 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

3com AP3750 Owner's Manual Page 16