3com 2924-PWR User Manual Page 164

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 163
164 CHAPTER 13: CONFIGURING QUALITY OF SERVICE
Defining CoS The CoS Setup Page contains information for enabling QoS globally.
Monitor users have no access to this page.
To configure CoS Settings:
1 Click Device > QoS > CoS Setup. The CoS Setup Page opens:
Figure 78 CoS Setup Page
The CoS Setup Page contains the following fields:
QoS Mode — Specifies if QoS is enabled on the device. The possible
values are:
Disable — Disables QoS on the device.
Enable — Enables QoS on the device.
Select Port(s) — Selects the ports to be configured.
Set Default — Sets the default user priority. The possible field values
are 0-7, where 0 is the lowest and 7 is the highest priority.
Restore Default Restores the device factory defaults for CoS
values.
2 Define the fields.
3 Click . CoS is configured on the device, and the device is
updated.
Page view 163
1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 247 248

Comments to this Manuals

No comments