3com Wireless LAN Controller WX2200 User Manual Page 179
- Page / 204
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
OPTIMIZING A NETWORK PLAN
Optimizing your network is a post-deployment technique. You can
optimize your WLAN by importing RF measurement data to correct RF
attenuation obstacle information in your network plan. You optimize
your network plan because:
You have a reported coverage problem in your network
You want to verify your network RF coverage
The RF measurement data you use to optimize your network plan can
originate from:
MAPs in your network. You can leverage the RF measurements
derived from your MAPs. If you choose to use RF measurement data
from the MAPs in your network, the data is determined against a
smaller set of RF measurements.
An Ekahau Site Survey™ tool. You perform a site survey of your
network. The benefit of using RF measurements derived from a site
survey is that the results more closely match the coverage
environment that your wireless users experience in your network.
Thousands of measurements can be recorded, creating a set of RF
measurements that are more precise than those gained from your
deployed MAPs.
Both MAPs and a site survey.
By importing data and applying it to your network plan, you correct the
RF model to reflect what the measurements report. You update the RF
attenuation for obstacles based on real-world measurements. You can
then replan your network to:
Make changes in the software to improve signal strength and
coverage for groups or individuals
Modify MAP locations
Add additional equipment to your network
8
- Wireless LAN Mobility System 1
- Wireless LAN Switch Manager 1
- User’s Guide 1
- 3Com Corporation 2
- 350 Campus Drive 2
- Marlborough, MA USA 2
- 01752-3064 2
- CONTENTS 3
- CONFIGURING WIRELESS SERVICES 4
- 4 USING RF AUTO-TUNING 5
- 6 USING RF PLANNING 5
- 8 OPTIMIZING A NETWORK PLAN 6
- ABOUT THIS GUIDE 9
- Table 2 Text Conventions 10
- Documentation 11
- Comments 11
- 12 ABOUT THIS GUIDE 12
- GETTING STARTED 13
- Hardware 14
- Requirements for 14
- 3WXM Services 14
- Software 14
- Requirements 14
- Preparing for 15
- Installation 15
- HAPTER 1: GETTING STARTED 16
- Installing 3WXM 17 17
- 18 CHAPTER 1: GETTING STARTED 18
- Installing 3WXM 19 19
- Clients to 3WXM 20
- Start 3WXM 20
- Services 20
- Connect 3WXM 20
- 22 CHAPTER 1: GETTING STARTED 22
- 3WXM Interface 23 23
- Administrator yes yes yes 23
- Provision no yes yes 23
- Monitor no no yes 23
- 24 CHAPTER 1: GETTING STARTED 24
- 3WXM Interface 25 25
- 26 CHAPTER 1: GETTING STARTED 26
- 3WXM Interface 27 27
- 28 CHAPTER 1: GETTING STARTED 28
- PLANNING AND MANAGING YOUR 29
- WIRELESS NETWORK WITH 29
- Which Services To 30
- Provide? 30
- RF Coverage Area 33 33
- Configuration 37 37
- Configuration 39 39
- Configuration 41 41
- Management and 43
- Management and Monitoring 45 45
- Table 8 3WXM Reports 47
- RF Plan 48
- Optimization 48
- RF Plan Optimization 49 49
- Configure 52
- Employee Access 52
- Click Finish 54
- Table 10 3Com VSAs 60
- 5 Click Next 62
- Configure Guest 69
- Access Services 69
- YY/MM/DD-HH:MM 73
- Guests for the SSID 76
- Encrypted—Data is encrypted 77
- Configure Voice 83
- as the Name 85
- SpectraLink 86
- Vocera 86
- What’s Next? 95 95
- USING RF AUTO-TUNING 97
- Create a Service 99
- Create a Radio 100
- Profile and Map the 100
- Service Profile to It 100
- Create Your MAPs 101 101
- Create Your MAPs 103 103
- Apply a Radio 104
- Profile to Each 104
- USING RF AUTO-TUNING WITH 105
- MODELLING 105
- Add Site 106
- Information 106
- Add Site Information 107 107
- Insert RF Obstacles 109 109
- Create Your RF 110
- Coverage Area 110
- Ceiling box 113
- USING RF PLANNING 121
- Prepare the Floor 122
- Drawings 122
- Define Site 123
- HAPTER 6: USING RF PLANNING 124
- Define Site Information 125 125
- Define Site Information 127 127
- Define Site Information 129 129
- 3 Click Next 131
- Import a Site 134
- Plan RF Coverage 135 135
- Plan RF Coverage 137 137
- Plan RF Coverage 141 141
- Plan RF Coverage 143 143
- Plan RF Coverage 145 145
- Plan RF Coverage 147 147
- Plan RF Coverage 149 149
- Generate a Work 151
- Install the 153
- Equipment 153
- MANAGING AND MONITORING 155
- YOUR NETWORK 155
- Perform Basic 157
- Administrative 157
- Distributing System 159
- Importing and 161
- Exporting Switch 161
- Configuration Files 161
- Monitoring 163
- Examples 163
- Username 164
- MAC address 164
- IP address 164
- VLAN name 164
- Monitoring Examples 165 165
- Monitoring Examples 167 167
- 802.11b–11 Mb/s (optimum) 168
- 802.11g/a–36 Mb/s or higher 168
- Monitoring Examples 169 169
- Monitoring Examples 171 171
- Monitoring Examples 173 173
- 4 Select Radio Profiles 174
- Profile wizard appears 174
- Monitoring Examples 175 175
- Monitoring Examples 177 177
- OPTIMIZING A NETWORK PLAN 179
- Using RF 180
- Measurements 180
- Site Survey 181
- Optimizing the RF 187
- Coverage Model 187
- Locating and Fixing 189
- Coverage Holes 189
- OBTAINING SUPPORT FOR 193
- YOUR 3COM PRODUCTS 193
- ■ Diagnostic error messages 195
- +61 2 9937 5048, or send an 196
- NDEX 201 201
- NDEX 203 203
- 204 INDEX 204
Related products and manuals for Computer Accessories 3com Wireless LAN Controller WX2200
Computer Accessories 3com 3800 User Manual
(182 pages)
(182 pages)
Computer Accessories 3com 3500 User Manual
(784 pages)
(784 pages)
Computer Accessories 3com 1100 User Manual
(248 pages)
(248 pages)
Computer Accessories 3com TR User Manual
(126 pages)
(126 pages)
Computer Accessories 3com 2924-PWR User Manual
(248 pages)
(248 pages)
Computer Accessories 3com 1000 User Manual
(152 pages)
(152 pages)
© 2020, manymanuals.com. All rights reserved. | 1.257 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals