3com 2226 PLUS Owner's Manual download pdf (Page 49)

Configuring VLANs 49

Figure 32 Tagged VLAN Configuration

To set up the configuration shown in Figure 32,

do the following:

1 Create VLAN2 on both Switch 1 and Switch 2.

You need not create VLAN1 since it exists by

default.

2 On Switch 1, set the ports that you want to be

part of VLAN2 to Untagged. Set one port (for

example, port 16) to Tagged.

Click Apply.

3 On Switch 2, set the ports that you want to be

part of VLAN2 to Untagged. Set one port (for

example, port 8) to Tagged.

Click Apply.

4 Connect the Tagged port on Switch 1 (in this

example, port 16) to the Tagged port on Switch

2 (in this example, port 8).

Those ports on Switch 1 that are members of

VLAN2 can now communicate with those ports

on Switch 2 that are members of VLAN2.

Spanning Tree

Spanning tree is a bridge-based system for

providing fault tolerance on networks and can

be used to detect and disable network loops.

The spanning tree ensures that the optimal

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 93 94

No comments

3com 2226 PLUS Owner's Manual Page 49