3com NETBuilder II Owner's Manual download pdf (Page 6)

1-2 Installation

Before Installing the HSSI Module

3. Verify that you have received all the contents.

When you purchase the HSSI module, you receive the following:

■

HSSI module

■

NETBuilder II HSSI Module Installation Guide

If an item is missing from an undamaged carton, contact your network supplier to secure a

replacement.

4. Write down the serial number and the MAC address from the label on the

component side of the HSSI module on the following line:

Serial number example: S/N:1BK12345

MAC address example: 0800021A4B5C

You will need this information if you have to contact your network supplier.

The MAC address is also encoded in the HSSI module’s EEPROM. Use the procedure in

Appendix B, “Displaying the MAC Address,” to display the MAC address encoded in the

EEPROM.

NETBuilder II

HSSI Module

Installation Guide

A member of the NETBuilder family

For 3Com User Group Information

1-800-NET-3Com

or your local 3Com office

Manual Part No. 09-0489-000

Published January, 1994. Printed in the U.S.A.

Serial number label

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

No comments

3com NETBuilder II Owner's Manual Page 6