3com 3C17300 Owner's Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
About the Switch 4200 Series 15
Fiber GBIC's.
The default state for these ports is auto-negotiation enabled, where
speed, duplex and flow control modes are negotiated. Because the speed
and duplex modes are fixed by the media type, only the flow control is
negotiated with the link partner. Alternatively, auto-negotiation can be
disabled and the flow control setting can be manually configured.
1000BaseT GBIC's
These ports will auto-negotiate to 1000BASE-T, full duplex only. Although
it is not possible to disable auto-negotiation it is possible to change the
advertised capabilities for flow control support, effectively enabling or
disabling flow control.
LEDs Table 4 lists LEDs visible on the front of the Switch, and how to read their
status according to color. For information on using the LEDs for problem
solving, see “Solving Problems Indicated by LEDs”
on page 54.
It is not possible to determine the duplex mode from the LEDs. For more
detailed information, refer to the “SuperStack
3 Switch Management
Interface Reference Guide” on the CD-ROM that is supplied with the
Switch.
Table 4 LED behavior
LED Color Indicates
Port Status LEDs 10BASE-T/100BASE-TX ports
Green A 100 Mbps link is present and the port is enabled.
Green flashing Packets are being transmitted/received on the port.
Yellow A 10 Mbps link is present and the port is enabled.
Yellow flashing Packets are being transmitted/received on the port.
Green / Yellow
alternating
A 10 or 100 Mbps link is present, but the port is disabled.
Off No link is present.
Port Status LEDs GBIC ports
Green A 1000 Mbps link is present and the port is enabled.
Green flashing Packets are being transmitted/received on the port.
Port Status LEDs 10/100/1000BASE-T ports
Green A 1000 Mbps link is present and the port is enabled.
(continued)
DUA1730-0AAA02.book Page 15 Thursday, January 23, 2003 12:28 PM
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Comments to this Manuals

No comments