3com 3C17300 Owner's Manual download pdf (Page 40)

40 CHAPTER 3: SETTING UP FOR MANAGEMENT

2 Open your terminal emulation software and configure the COM port

settings to which you have connected the cable. The settings should be

set to match the default settings for the Switch, which are:

■ 19,200 baud

■ 8 data bits

■ no parity

■ 1 stop bit

■ no hardware flow control

Refer to the documentation that accompanies the terminal emulation

software for more information.

Setting Up the Switch with IP Information

You are now ready to manually set up the Switch with IP information

using the command line interface.

1 The command line interface login sequence begins as soon as the Switch

detects a connection to its console port.

If the login prompt does not begin immediately, press Return a few times

until it starts.

2 At the login and password prompts, enter admin as your user name and

press Return at the password prompt. If you have logged on correctly, the

top-level menu of the command line interface is displayed as shown in

the example in Figure 12

DUA1730-0AAA02.book Page 40 Thursday, January 23, 2003 12:28 PM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 83 84

No comments

3com 3C17300 Owner's Manual Page 40