3com 3C17300 Owner's Manual Page 37
- Page / 84
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Manually Configuring IP Information 37
If there is no response, wait for one minute then re-enter the default IP
address.
3 At the login and password prompts, enter admin as your user name and
press Return at the password prompt (default user name and password).
If you have logged on correctly, a set of Getting Started pages are
displayed.
4 The Getting Started pages allow you to enter basic setup information for
the Switch. Select Manual and then enter the IP address, subnet mask,
and default gateway that you want the Switch to use when it is
connected to the network. The final page displays a summary of the
information entered.
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See “Methods of
Managing a Switch” on page 45.
Using Command Line Interface via Telnet
Accessing the Command Line Interface via Telnet or Windows
HyperTerminal using TCP/IP may not work correctly on some platforms
unless it has been configured to send line feeds with carriage returns.
To set this for telnet enter set crlf when in command mode. To set
this for HyperTerminal click on the Settings tab in the Properties screen,
click on ASCII Setup.. and ensure that Send line ends with line feeds is
checked within the ASCII Sending section. You should not configure
HyperTerminal in this way if you are using a console cable to make a
direct connection to the Switch.
1 To start a Telnet session to the unit, click Start in Microsoft Windows
95/98/2000/NT.
a Click Run.
b In the dialogue box that appears type the default IP address of the
unit, that is: Telnet 169.254.100.100
c Click OK.
2 Press Enter to open a login prompt.
If the login prompt does not begin immediately, press Return a few times
until it starts.
3 At the login and password prompts, enter admin as your user name and
press Return at the password prompt. If you have logged on correctly, the
DUA1730-0AAA02.book Page 37 Thursday, January 23, 2003 12:28 PM
- SuperStack 1
- Switch 4200 Series 1
- Getting Started Guide 1
- 3Com Corporation 2
- 5400 Bayfront Plaza 2
- Santa Clara, California 2
- 95052-8145 2
- CONTENTS 3
- 3 SETTING UP FOR MANAGEMENT 4
- 4 PROBLEM SOLVING 4
- A SAFETY INFORMATION 5
- B PIN-OUTS 5
- C TECHNICAL SPECIFICATIONS 5
- D TECHNICAL SUPPORT 5
- REGULATORY NOTICES 6
- ABOUT THIS GUIDE 7
- Table 1 Notice Icons 8
- Table 2 Text Conventions 8
- Related 9
- Product 10
- Registration 10
- Documentation 10
- Comments 10
- INTRODUCING THE 11
- SUPERSTACK 3 SWITCH 4200 11
- About the Switch 12
- 4200 Series 12
- — Front View 13
- Table 4 LED behavior 15
- — Rear View Detail 17
- Table 5 Default Settings 18
- INSTALLING THE SWITCH 19
- Choosing a Suitable 20
- Rack-mounting 21 21
- Placing Units On 23
- Top of Each Other 23
- The Power-up 24
- Sequence 24
- The Power-up Sequence 25 25
- Color State 25
- GBIC Operation 27 27
- ■ Fiber SC connector 28
- GBIC Ports 29
- Transceiver 29
- SETTING UP FOR MANAGEMENT 31
- Setting Up 32
- Overview 32
- Setting Up Overview 33 33
- Manually 35
- Configuring IP 35
- Information 35
- ■ IP address — 169.254.100.99 36
- ■ Subnet mask — 255.255.0.0 36
- ■ A suitable cable: 39
- ■ 19,200 baud 40
- ■ 8 data bits 40
- ■ no parity 40
- ■ 1 stop bit 40
- ■ no hardware flow control 40
- Viewing 42
- Automatically 42
- Configured IP 42
- Methods of 45
- Managing a Switch 45
- Command Line 47
- Interface 47
- Management 47
- ✓ ✓ ✓ ✓ ✓ ✓ 48
- ✕ ✓ ✓ ✓ ✓ ✕ 48
- ✓ ✓ ✓ ✓ ✓ ✕ 48
- Setting Up SNMP 49
- Default Users and 50
- Passwords 50
- Switch CD-ROM 51
- PROBLEM SOLVING 53
- Solving Problems 54
- Indicated by LEDs 54
- Solving Hardware 55
- Problems 55
- Solving 55
- Communication 55
- Solving Stack 56
- Formation 56
- Solving Software 57
- Upgrade Problems 57
- 58 CHAPTER 4: PROBLEM SOLVING 58
- SAFETY INFORMATION 59
- Important Safety Information 60
- PPENDIX A: SAFETY INFORMATION 62
- PIN-OUTS 67
- RJ-45 Pin 68
- Assignments 68
- 1000BASE-T RJ-45 69
- Pin Assignments 69
- Table 13 Pin assignments 70
- TECHNICAL SPECIFICATIONS 71
- Switch 4250T 73
- (3C17302) 73
- Switch 4228G 74
- (3C17304) 74
- TECHNICAL SUPPORT 75
- Network Supplier 76
- Support from Your 76
- ■ Diagnostic error messages 77
- Asia, Pacific Rim 78
- Returning Products 79
- PPENDIX D: TECHNICAL SUPPORT 80
Related products and manuals for Network switches 3com 3C17300
Network switches 3com 3CNJ95 Owner's Manual
(60 pages)
(60 pages)
Network switches 3com 4210G Owner's Manual
(78 pages)
(78 pages)
© 2020, manymanuals.com. All rights reserved. | 0.537 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals